RFID UHF integrated reading and writing module F90A1-S

F90A1-S is a UHF integrated reading and writing module based on PHYCHIPS PR9200 design. The maximum output power of the module can reach +25 dBm. With a 1dBi circularly polarized ceramic antenna, the reading distance can reach 2.5m, and can achieve more than 200tags/ s tag recognition rate, with stable multi-tag reading and anti-interference ability.

The F90A1-S integrated read-write module has been verified by a large number of tests and long-term uninterrupted work (180 consecutive days), and its stability and reliability can fully meet the needs of use.

Introduction
Specification
Appearance

F90A1-L receiving sensitivity can reach -62dBm, which is more suitable for harsh application environments than traditional readers;
Provide a full-featured software development kit (SDK) and interface (API), easy to integrate with software;
Using an integrated radio frequency chip, the module performance is stable, and it is more suitable for harsh and demanding application environments;
Using carrier cancellation technology, the accuracy of tag reading is good and the range is wide;
Enhanced noise suppression for reliable data capture;
With high precision return signal strength (RSSI).

Product interface definition

pins	Name	Description	Remarks
1	GND	GND
2	P_EN	The power supply of the module is enabled. This pin defaults to a high level of 5V. When an external low level (0V) is connected, the F90A1 module enters a sleep state
3	RXD	Serial interface reception, TTL level, low level is 0V, high level is 3.3V～5.0V
4	TXD	Serial interface transmission, TTL level, low level is 0V, high level is 3.3V
5	5V	DC power supply, the input voltage is 5.0V, and the maximum working current of F90A1 is 500mA.

Name	F90A1
RF chip	PHYCHIPS PR9200
Air Interface Protocol	EPC global UHF Class 1 Gen 2/ISO 18000-6C
Working Frequency	840～960MHz (default frequency band 920～925MHz)
Support area	China, Europe, America, Korea, Japan, Taiwan…

Working Voltage	DC 5.0V
Peak operating current	500mA
Standby current	≤30mA
Sleep current	≤0.5mA
Maximum output power of RF port	25dBm
Operating temperature	-25℃～+65℃
Working Humidity	≤95%（+25℃）
Storage temperature	-30℃～+70℃
Maximum receiver sensitivity	-62dBm
Antenna Interface Impedance	50Ω

Serial port communication parameters	Baud rate adjustable (default 115200bps), parity: none, Data bits: 8 bits, stop bits: 1 bit
Power output settings	15～25dBm adjustable/adjustable minimum interval is 1dBm
DRMmode	Support
RSSI	Support
High temperature automatic protection function	Support
Power Enable	Support