1. The reader supports communication interfaces such as Wiegand 26/34, RS232 and 100M Ethernet ports;
2. The reader supports active reading, command trigger, timing trigger, etc. to meet the different needs of users;
3. Adopt multi-reader device technology to support multi-reader-intensive environment working mode;
4. The reader antenna adopts an external installation method, which can be flexibly configured with various omnidirectional and directional antennas to meet the needs of various application scenarios;
5. The reading distance can be adjusted by software to realize perimeter applications;
6. Provide a powerful API user interface, which can quickly integrate and connect with the user’s existing information system;
7. The design, device selection and production testing process of the reader refer to the industrial product label, which can meet the use under various harsh conditions;
8. This product adopts an alloy cavity shell, which has the advantages of high strength and anti-interference;
9. The communication protocol is independently developed by Xunyuan, which can be customized and expanded according to special user needs;
10. Provide a supporting Xunyuan API development kit, so that customers can quickly complete the development.

Simple fault description and troubleshooting

Run light flashing prompt:

1. Start and run 800ms on, 700ms off;
2. The wired network connection is successful (or the WIFI network connection is successful, or the 4G network connection is successful), 160ms on, 140ms off;
3. When entering the MQTT connection state, the blinking speed increases by 5 times on the basis of a successful network connection.

Buzzer prompt:

1. The WIFI/4G/wired network connection is successful, and the buzzer will sound 3 consecutive times, with an interval of about 50ms;
2. The MQTT connection is successful, and the buzzer sounds 3 times in a row, with an interval of about 20ms;
3. After the wired network connection is successful, if an abnormal disconnection occurs, the buzzer will beep for a long time, with an interval of 500ms;
4. The parameter is set successfully, the buzzer will sound twice continuously, and the time interval is about 50ms;
5. After restoring the system settings, the buzzer will sound 3 consecutive times with an interval of about 80ms;
6. The self-test of the power-on module fails, and there are 2 consecutive beeps, with an interval of 800ms;
7. The self-test of the power-on module is successful, and the buzzer will sound once for 200ms;
8. The connection module is a Rodin module, and it sounds 3 times in a row with an interval of 100ms.

Interface Description